8-8
Specifications & Consumer information
Lubricant
Volume
Classification
Brake fluid
As required
FMVSS116 DOT-3 or DOT-4
Rear differential oil (4WD)
0.7
l
(0.74 US qt.)
HYPOID GEAR OIL API GL-5, SAE 75W/85
(SK HCT-5 GEAR OIL 75W/85 or
EQUIVALENT)
Transfer case oil (4WD)
Diesel 2.2
0.65
l
(0.69 US qt.)
Gasoline 3.5
MPI / 3.8 GDI
0.7
l
(0.74 US qt.)
Fuel
71
l
(18.75 US gal.)
Refer to Fuel requirements in the introduction
chapter.
Always be sure to clean the area around any filler plug, drain plug, or dipstick before checking or draining
any lubricant. This is especially important in dusty or sandy areas and when the vehicle is used on unpaved
roads. Cleaning the plug and dipstick areas will prevent dirt and grit from entering the engine and other
mechanisms that could be damaged.
CAUTION
Recommended SAE viscosity number
Engine oil viscosity (thickness) has an effect on fuel economy and cold weather operating (engine start and engine
oil flowability). Lower viscosity engine oils can provide better fuel economy and cold weather performance, however,
higher viscosity engine oils are required for satisfactory lubrication in hot weather. Using oils of any viscosity other
than those recommended could result in engine damage.