3-166
Convenience features
Clean air (if equipped)
When the ignition switch is in the ON
position, the clean air function turns
on automatically.
Also, the clean air function turns off
automatically, when the ignition
switch is in the OFF position.
Automatic ventilation
(if equipped)
To increase cabin air quality and
reduce windscreen misting, air recir-
culation mode switches off automati-
cally after about 5 to 30 minutes,
depending on outside temperature,
and the air intake will change to out-
side (fresh) mode.
To cancel or set the automatic venti-
lation feature, select Face level mode
and while pressing the air condi-
tioning button (A/C), press the air
recirculation mode button at least 5
times within 3 seconds.
When the automatic ventilation is
set, the air recirculation indicator will
blink 6 times. When canceled, the
indicator will blink 3 times.
Sunroof inside air recirculation
(if equipped)
When the sunroof is opened, out-
side (fresh) air will be automatically
selected. At this time, if you press the
air intake control button, recirculated
air position will be selected but will
change back to outside (fresh) air
after 3 minutes.
When the sunroof is closed, the air
intake position will return to the orig-
inal position that was selected.
Auto comfort control
(for driver’s seat) (if equipped)
The temperature of the driver’s seat
warmer, air ventilation seat and heat-
ed steering wheel is automatically
controlled depending on the inside
and outside temperature of the vehi-
cle when the engine is running.
To use this function, it must be acti-
vated from the Settings menu in the
Audio / AVN system screen. Select:
- All menus
→
Setup
→
Vehicle
→
Heated / Ventilated Features
For more details on Auto Comfort
Control, refer to “Seat warmers
and air ventilation seat” in chapter
2, and “Heated steering wheel” in
chapter 3.
CLIMATE CONTROL ADDITIONAL FEATURES