Genuine Accessories
10
Caution: Do not damage the Steering Wheel, Steering Column, Wire Harness, or Electrical Connectors.
Move the Steering Column through it's full range of motion to ensure that Remote Start Harness and Factory Harness does not interfere with vehicle components
or make contact with sharp edges of steering column. Make sure the Remote Start Harness and Factory Harness do not contact any sharp metal parts in the
steering column, including the tilt mechanism and springs. Readjust the ties/harnesses if necessary to prevent contact.
N
O
T
E
A. Make sure the steering column is fully extended / tilted up and locked in place before installing the three (3) wire ties.
B. Make sure the Remote Start Harness is routed as shown.
C. Using three (3) Wire Ties, secure the Remote Start Harness to the Factory Harness as shown.
D. Trim excess Wire Ties material.
Wire Cutters
Remote Start 6-Pin
Male Connector
Remote Start
6-Pin Female
Ignition Connector
Remote Start
Harness
Ignition Switch
Connector
Wire Ties
Factory Harnesses
Factory 6-Pin Female
Ignition Connector
Revision Date
06/05/2020
Page 7 of 13
