Video Intercom Indoor Station
·
Quick Start Guide
17
Figure 4-6
Network Settings
2.
Enable
DHCP, then the indoor station can search and get an IP address automatically.
Skip the following steps if you have set an IP address for the indoor station by DHCP
function.
3.
Set the IP address manually.
1)
Tap
to pop up the network parameters settings dialog box.
Figure 4-7
Network Settings Box
2)
Enter IP address, subnet mask, and network gateway.
3)
Tap
OK.
4.3.2
Set Linked Device IP
Linked network parameters refers to the network parameters of devices (like door
station, doorphone, master station, center, etc.), to which the indoor station is linked.
Linked devices for the indoor station refers to door station, center, master station, and
doorphone.
With the private SIP protocol,
intercom can be realized only when all these devices are
in the same network segment with the indoor station.
With the standard SIP protocol,
intercom can be realized when all these devices support
the standard SIP protocol.
