Video Intercom Indoor Station
·
Quick Start Guide
13
STRONG PASSWORD RECOMMENDED–
We highly recommend you to create a strong
password of your own choosing (using a minimum of 8 characters, including
at least three kinds of following categories: upper case letters, lower case
letters, numbers, and special characters) in order to increase the security of
your product. And we recommend you reset your password regularly,
especially in the high security system, resetting the password monthly or weekly can
better protect your product.
4.2
Set SIP Sever
A SIP server connection is required and necessary for the indoor station to guarantee
the connection between the indoor station and the management center (master station)
in the same video intercom system.
2 types of SIP protocol are available for the indoor station: Private Protocol, and
Standard Protocol.
z
Rebooting the indoor station is required when you switch the SIP protocol between
the private SIP protocol and the standard SIP protocol.
z
All linked device IP should be configured again after you change the SIP protocol type.
z
The indoor extension does not support SIP sever settings.
4.2.1
Set Private SIP
The SIP server IP is required for you to set when you select Private Protocol, and the
SIP IP must be in the same network segment with the intercom devices in the system.
Steps:
1.
Go to SIP Settings page to select SIP protocol type:
Settings -> Configuration -> SIP
Settings.
2.
Select
Private Protocol.
z
Default admin password is 888999.
z
The default SIP protocol is private protocol.
