Hyundai HYTR36LI, Руководство пользователя

Страница: 19 / 24

7.2. Motor cooling.
7.2.1. To avoid overheating and damage to the motor, always keep the cooling air vents clean and
free of grass and debris.
7.3. Head coil replacement (Fig 8).
7.3.1. Press the two side buttons (1) and remove the cover (2).
7.3.2. Lift out the coil (3).
7.3.3. Insert the new spool, making sure that the end of the line (4) protrudes from the hole in the
head.
7.3.4. Remount the cover (2).
7.4. Sharpening the line cutting knife (Fig. 9)
7.4.1. Unscrew the two screws (1) and remove the line cutting knife (2) from the guard (3).
7.4.2. Fix the line cutting knife in a vice and sharpen. If using a flat file, be careful to retain the
original cutting angle.
7.4.3. Refit the knife guard.
7.5. Storage.
7.5.1. After every work period, clean the machine thoroughly to remove all dust and debris, and
repair or replace any faulty parts.
7.5.2. The machine must be stored in a dry place away from the elements and out of the reach of
children.
7.6. Extraordinary maintenance.
7.6.1. All maintenance operations not foreseen in this manual must be performed exclusively by
your dealer.
7.6.2. All and any operations performed in unauthorised centres or unqualified person will
invalidate the warranty.
8. TROUBLESHOOTING
Fault Source of problem Corrective action
The motor does not start when
you switch it on.
No battery or not inserted.
Make sure that the battery is
installed correctly.
Battery exhausted.
Check charge status
and recharge the battery
The motor stops during
operation.
Battery not inserted correctly.
Make sure that the battery is
installed correctly.
Battery exhausted. Check charge status
and recharge the battery
Reduced battery power reserve
Difficult operating conditions
drawing more current.
Reduce load on machine.
The battery charger does not
charge the battery (green
indicator light on).
Dirty contacts. Clean contacts.
The battery charger does not
charge the battery (no red led
on). No power supply to battery
Charger.
Check the plug is inserted and
that the socket is live.
Defective battery charger Replace with original spare part.