6.5.
Charging the battery.
6.5.1.
Remove the battery from the machine,
6.5.2.
To recharge the battery,
6.5.2.1.
Connect the battery charger (1) to a mains power socket; a green power light (3) will
come on indicating there is voltage.
6.5.2.2.
Insert the battery pack (2) into the battery charger (1), pushing it in completely.
Recharging a completely flat battery requires approximately 100 minutes.
6.5.2.3.
The recharging phases are indicated by the charge status lights (6),
6.5.2.4.
Battery charger connected = Green charge light (4) is on.
6.5.2.5.
Battery inserted and recharging in progress = Green power light (3) on and Charge
light (4) on (Red when charging).
6.5.2.6.
Recharging completed = Green charge light (4) on and Charge light (4) on (Green
when charged).
6.5.3.
Irregular condition = Green power light (3) fl Charge light (4) flashing.
6.5.4.
Short circuit = Charge light (4) flashing RED.
6.5.5.
Recharging a completely flat battery requires approximately 100 minutes.
6.5.6.
When recharging has been completed;
6.5.7.
Remove the battery pack (2) from the battery charger (1) and refit it on the machine.
6.5.8.
Disconnect the battery charger (1) from the mains power socket.
6.6.
Checking the battery status.
6.6.1.
To check the condition of the battery charge status press the small button (5) which
activates three charge status lights (6) which indicate the following;
Check that the socket mains voltage is the same as that indicated on the battery
charger plate.
