Hyundai HYTR2650, Руководство пользователя

Страница: 15 / 20

6. TROUBLESHOOTING.
6.1. Engine Troubleshooting - N.B. all corrective actions should be carried out by suitably qualified
person/s.
Problem Check Status Cause Remedy
Engine cranks.
or
Starts hard.
or
Does not start.
Fuel at
Carburetor
No fuel at
Carburetor
Fuel filter blocked
Fuel line blocked or
clogged
Carburetor
Clean or replace.
Clean or replace.
Contact dealer.
Fuel at Cylinder
No Fuel at
cylinder
Carburetor
Contact dealer.
Exhaust wet
with fuel
Fuel mixture too rich
Open Choke.
Clean/replace air
filter.
Adjust carburetor.
Contact dealer.
Spark at end of
Plug wire
No spark
Stop switch OFF
Electrical problem
Interlock switch
Turn switch to ON.
Contact dealer.
Contact dealer.
Spark at Plug No spark
Spark gap incorrect
Covered with carbon
Fouled with fuel
Defective plug
Adjust to 0.65mm.
Clean or replace.
Clean or replace.
Replace plug.
Engine runs, but
dies or does not
accelerate
properly.
Air filter Air filter dirty Normal wear Clean or replace.
Fuel filter Fuel filter dirty
Contaminants/residues in
fuel
Replace fuel.
Fuel vent
Fuel vent
blocked
Clear vent Clear or replace.
Spark plug
Plug dirty or
worn
Normal wear
Clean, adjust or
replace.
Carburetor
Improper
adjustment
Vibration Adjust.
Cooling system Excessive heat
Extended operation in
dirty/dusty locations Clean and let
machine cool down.
Spark arrestor
screen
Screen cracked,
or perforated
Normal wear Replace.
Engine does not
crank
N/A N/A Internal engine problem Contact dealer.
Page 15