Hyundai HYT150 Скачать руководство пользователя | Manualshive

Страница: 27 / 52

background image

Preparation

Fuel Type : Fresh Straight Unleaded Petrol
Fuel Capacity : 0.8L

Adding Fuel

NOTE -

The machine is delivered without petrol. All machines are tested and inspected so there

may be some residual petrol left in the machine so please fill with caution.

Remove the fuel tank cap.

1

Fill the fuel tank with fresh straight unleaded petrol. Allow a 25mm gap from the top of the tank,
then refit the cap securely. DO NOT mix petrol with oil and clean up any spills immediately.

NOTE -

DO NOT overfill. The fuel tank only needs to contain enough fuel to complete the days

work. If you run out of fuel, refilling must only be done once the engine has cooled down. Fuel
stored within the machine for 28 days or more can go stale and should be drained before further
use.

NOTE -

Make sure not to drip petrol onto the plastic parts to prevent damaging them and remove

all traces of spilt petrol immediately. The warranty will not cover damage to plastic parts caused
by petrol.

2

Refit the fuel filler cap securely and clean up any fuel spilt before starting the engine.

3

Make sure you read the fuel safety before handling fuel.

27

www.hyundaipowerproducts.co.uk

01646 687 880

[email protected]

«
...
25
26
27
28
29
...
»

Содержание HYT150





















































Отзывы:

Нет отзывов

Похожие инструкции для HYT150

Бренд: TATA Motors Страницы: 30

Бренд: Daikin Страницы: 44

Бренд: Shindaiwa Страницы: 24

Бренд: York Страницы: 24

Бренд: Troy-Bilt Страницы: 40

Бренд: Texas Страницы: 54

Бренд: Clint Страницы: 28

Mark Master 218-405-06

Бренд: MTD Страницы: 27

Бренд: Robur Страницы: 96

Бренд: sunjoe Страницы: 16

Бренд: Retigo Страницы: 26

Бренд: Texas Equipment Страницы: 18

Бренд: Texas Equipment Страницы: 26

Бренд: Texas Equipment Страницы: 28

Бренд: Stiga Страницы: 26

Бренд: Galletti Страницы: 24

Бренд: Stihl Страницы: 276

Бренд: Daikin Страницы: 35

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды