1.5.5.
Wear close fitting clothing to help protect you from cuts. Always wear long pants, sturdy
non-slip shoes and protective equipment such as gloves, goggles, a helmet with a visor and an
acoustic shield.
1.5.6.
Do not allow anyone to remain in the range of the pole chain saw during use. Keep people,
children and animals away from the work area. If conducting group work, keep sufficient
distance between people.
1.5.7.
Make sure that the handles are clean and dry. When the pole chain saw is running always
grip the front handle with your left hand and the rear handle with your right hand.
1.5.8.
Always maintain a stable, balanced and firm stance during operation. Do not work on
slippery or unstable ground.
1.5.9.
Firmly hold the pole chain saw with both hands. Put yourself in a position that allows you to
withstand the forces applied by a backlash. Never let go of the machine.
1.5.10.
Always start sawing with the moving chain running.
1.5.11.
Do not saw with the tip of the saw guide bar.
1.5.12.
During cutting, some tension on the wood may be released suddenly and cause spring-backs
or hazardous releases.
1.5.13.
Never use the pole chain saw above shoulder height when cutting.
1.5.14.
Never operate a damaged machine.
1.5.15.
Do not overload the machine.
1.6.
After use.
1.6.1.
Always remove the battery from the tool before performing any checks or maintenance.
1.6.2.
When carrying the tool, make sure the battery has been removed from its housing and the
guide bar has completely stopped. Hold the tool by the front handle with the guide bar
(encased in its protective sheath) turned away from you.
1.6.3.
Always follow the instructions provided for maintenance. After each use, check the
operation of safety devices, setting, tension and condition of parts. Replace worn or damaged
parts.
1.6.4.
Repairs to this cordless pole chain saw should be performed only by qualified personnel. For
safety reasons use only original Hyundai spare parts.
1.6.5.
Keep the pole chain saw clean and dry. Store it away from direct sunlight and out of the
reach of children.
1.6.6.
Keep this manual and consult it whenever you use the machine.
To reduce the time of exposure to vibration and noise, it is preferable to use the
machine with frequent breaks and limit the duration of continuous work.
The vibration level during actual use of the tool can differ depending upon how the
tool is used.
Page 6
Ver 2
Содержание HYPS36LI
Страница 1: ......
