www.hyundaipowerproducts.co.uk
38
Maintenance & Care
Clearing Jams
When trimming, pieces of debris from the hedge can become lodged between the
blades, causing the machine to stop. To clear the obstruction put the machine down
on a level surface, with the power supply switch off. Clear the jam and proceed with
operation
!
WARNING! When carrying out any maintenance, ensure the machine is
unplugged from mains power supply.
To ensure safety and reliability, repairs should only be carried out with genuine
replacement parts only.
!
Cleaning
To clean the body of the machine if required, use a damp cloth and mild soap. DO
NOT use cleaning chemicals, penetrating oils or fuel to clean the body of the machine.
This can cause damage and weaken the plastic.
Blade Lubrication
Firstly remove any debris from the blades. Keeping away from the body of the machine,
apply light machine oil or similar to the parts which make contact.
Blade Damage
If whilst trimming you hit any wire fences, stone posts etc. damage will occur to the
blades, such as nicks or gauges. If the damage does not interfere with the motion of
the blades, no action is required. If there is interference, using a file or sharpening
stone/block, reduce the size of the nick/gauge. If damage is unmaintainable, please
contact us.
Содержание HYP2HT550E
Страница 17: ...www hyundaipowerproducts co uk 17 Features Descriptions on next page Not To Scale F G H I C M P L J K N Q O E R...
Страница 24: ...Assembly Pole Trimmer Configuration Attach Trimmer Head Continued www hyundaipowerproducts co uk 24...
Страница 36: ...www hyundaipowerproducts co uk 36 Operation Adjusting Pole Length Continued...