www.hyundaipowerproducts.co.uk
26
Operation
Cutting A Hedge
1. Cut and remove branches exceeding the cutting capacity of this product using
a proper pruner before operation.
2. Always hold the product firmly with both hands on the front handle and rear
handle. Never operate this product using only one hand.
3. Do not rush and do not attempt to cut too much with one stroke of the cutting
device.
4. First cut both sides from the bottom cutting upwards to the top. This will prevent
any of the cuttings falling into the path of the area still to be cut.
See image 1.
5. After cutting the sides proceed to the top. Try to keep the cutting device angled
at approximately 15° to the cutting surface.
See image 2.
6. When cutting wide hedges with the cutting area in sight, move the cutting
blade lightly through the cutting surface in a sweeping motion, following the
shape of the hedge or shrub. A slight tilt downwards of the cutting blade in the
direction of motion is recommended for optimum cutting performance.
7. Cut in a number of stages if the area being cut is particularly long to achieve a
better result; smaller cuttings will allow for easy composting.
!
When operating the hedge trimmer, keep the extension cord behind the
trimmer. Never drape it over the hedge being trimmed.
Image 1
Image 2
NOTE:
When shaping it is advisable to achieve
a trapezoidal shape (
See image 3
). A
trapezoidal cut corresponds to the natural
growth of plants and results in optimal hedge
growth, as it will expose more light to the lower
end of the hedge.
Image 3
Содержание HYP2HT550E
Страница 17: ...www hyundaipowerproducts co uk 17 Features Descriptions on next page Not To Scale F G H I C M P L J K N Q O E R...
Страница 24: ...Assembly Pole Trimmer Configuration Attach Trimmer Head Continued www hyundaipowerproducts co uk 24...
Страница 36: ...www hyundaipowerproducts co uk 36 Operation Adjusting Pole Length Continued...