13
3.5
Hopper & Discharge Port
Part No
8
9
10
11
16
Designation
Safety Lever
Feed Hopper
Lower
Discharge
Chute
Upper
Discharge
Chute
Safety Cut Out
Switch
3.6
Attach the safety lever (8) with pivot bolts and shaft sleeve to the corresponding
position on the feed hopper (9).
Ensure the long shaft passes through the duct and spring on the lower side of the feed
hopper and adjust the spring to the correct height.
3.7
Bolt the feed hopper (9) to the main body (1).
You may require assistance at this stage.
3.8
Bolt the lower section of the discharge chute (10) to the main body (1).
3.9
Attach the upper section of the discharge chute (11), to the lower section (10).
The upper section can rotate to allow the chippings to be discharged in the direction
required.
