Hyundai HYC6220, Руководство пользователя

Страница: 25 / 32

25
9.17 Sprocket.
9.18 Check for cracks and for excessive wear interfering with the chain drive.
9.19 If wear is obvious, replace with a new one.
Never fir a new chain to a worn sprocket, or a worn chain on a new sprocket.
1. Sprocket 2. Needle bearing. 3. Clutch drum. 4. Spacer. 5. Clutch shoe.
9.20 Fuel Filter.
9.21 Disassemble the filter and clean or replace with a new one if required.
9.22 Oil Filter.
9.23 Disassemble the oil filter and clean or replace with a new one if required.
9.24 Front & Rear Dampers.
9.25 Inspect and replace and anti-vibration dampers that show and signs of cracking or
wear.
9.30 Saw Chain & Guide Bar.
WARNING
It is important that the saw chain cutters are kept sharp for safe and smooth
operation.
Always wear gloves when handling the saw chain.
9.31 Your saw chain will require sharpening when:
Sawdust becomes powder like.
You need to apply extra force to saw wood.
The cut way does not go straight.
Vibrations increase.
Fuel consumption increases.
9.32 Make sure the engine has stopped and has been allowed to cool down.
9.33 Make sure the saw chain is held securely.