Hyundai HYC6220, Руководство пользователя

Страница: 14 / 32

14
4. QUICK START GUIDE
CAUTION
This guide is meant to serve as a quick reference for operating your machine.
We
ALWAYS recommend reading the manual in full before operation.
Please consult the manual for the correct oil/fuel mixture and familiarise yourself
with all the safety and operation aspects of the chainsaw.
FROM COLD
4.0 Check the chainsaw is filled with the correct fuel mix (40:1)
4.1 Check the saw chain oil level is correct.
4.2
Turn the ignition switch to the ‘I’ ON position.
4.3 Engage the chain brake by pushing towards the chainsaw handle.
4.4 Pull the choke out firmly.
4.5 Press the primer bulb at least 8 times.
4.6 Place the chainsaw on flat ground, free from obstacles and secure by placing your
right foot through the rear handle with the chainsaw blade facing away from yourself
and firmly grasp the front handle with your left hand.
4.7 Press the decompression valve in. This will need doing every time you pull the recoil
handle for a cold start as it will automatically pop out every time you pull the handle.
4.8 Pull the recoil starter handle swiftly, 2 to 4 times until the engine begins to fire.
(
NOTE the chainsaw may not start at this stage).
4.9 Push the choke in.
4.10 Pull the recoil starter handle, until the engine starts.
4.11 Disengage the chain brake by pulling in backwards, away from the chainsaw blade.
4.12 Allow the chainsaw to warm up at half throttle for 20 seconds.
FROM WARM
4.12 Repeat the procedure for starting the chainsaw from cold but miss out steps
4.5, 4.7 & 4.8.
STOPPING
4.13 Release the throttle trigger and interlock trigger.
4.14 Allow the engine to idle for a few seconds.
4.15
Move the ignition switch to the ‘O’ OFF position.
4.16 The engine will now stop.