22
Problem
Possible cause
Solution
Compression ratio is OK
Filter clogged
Clean filter
Air is able to pass through
Tighten fuel lines to prevent
air from penetrating
Air is able to pass through the
carburetor connection
Tighten up
Engine is overheating
Stop the engine and let it cool
down.
When you restart it, avoid long
periods of heavy load and high
revs
Water in the fuel
Drain and replace fuel
Carbon clogged exhaust
Clean exhaust
Engine overheating
Fuel mixture too lean
Adjust the carburetor
Cylinder covered with carbon
Clean the cylinder
Engine knocking or making
a noise
Fuel has gone stale or bad
Replace with clean, fresh fuel
Carbon in the cylinder
Clean the cylinder
Some engine parts are worn
or damaged
Replace worn engine parts
Engine stops suddenly
The plug or plug wire
Firmly replace if loose
Piston seized
Change the piston
Spark plug covered in carbon
Clean or replace the spark
plug
Engine has run dry of petrol
Refill tank with fuel
Engine stops slowly
Carburetor clogged
Clean the carburetor
The air hole in the tank is
clogged
Clean the air hole
Water in the fuel
Drain and replace with fresh
fuel
Содержание HYBV26-2
