2.14 TWO SPEED CONTROL (NOT
AVAILABLE ON ALL MODELS)
A switch located on the LH steering control lever (Fig.
2.14A) is used to alternately activate the loader’s Two-
Speed function. Pressing and releasing the switch will
activate the Hi-speed function. Pressing and releasing the
switch a second time will return the loader to the Low-
speed function.
When the loader ignition is turned to the “OFF” position,
the Two-Speed control returns to the Low-speed function.
An indicator panel is mounted on the LH ROPS post (Fig.
2.14B) to show the operator which function is activated at
any given time. For proper loader operation, always select
the loader speed function which is best suitable for the
existing work environment.
NOTE: Always drive the loader at speeds compatible
with safety, especially when operating over rough ground,
unfamiliar terrain, when crossing ditches or when turning.
2. CONTROLS
C3907
Fig. 2.14B
Fig. 2.14A
C3015
CONTROL HANDLE
SEAT SIDE
ROPS SIDE
TWO SPEED
HI / LOW
BUTTON
(Not available
on all models)
21
