Hyundai HSH-121NBE, Руководство по обслуживанию

Страница: 25 / 259

6
6
.
.
C
C
O
O
N
N
T
T
R
R
O
O
L
L
M
M
O
O
D
D
E
E
34 Ο ×
★
× The failure for
temperature sensor of
indoor heater
exchange
38 Ο
★ ★ ★
Indoor EEPROM failure
39 Ο ×
★ ★
Indoor fan motor failure 7,9,12,18K
41
★ ★
×
★
The failure for Indoor
grounding protective
42 Ο Ο ×
★
Overcooling protection 7,9=-1 12=-7
43 Ο Ο
★
× Overheating protection
The failure is detected when the room temperature sensor broken or
shorted over 5 sec.
The failure is detected when the temperature sensor of heater exchange
broken or shorted over 5 sec.
The failure is detected when each setting data is not match after the
EEPPOM self-check two times.
The failure is occur when the grounding signal is not detected with
continuous 2 second after the appliance power ON.
5
．
5 Dimmer
The DIMMER button is pressed to turn ON/OFF all display. When the
DIMMER signal is received for the first time, the appliance will turn OFF all the
display(include the Sleep and Filter cleaning light), and any of signal from the
remote control is received, the DIMMER is turn OFF, all the display recovery.
The DIMMER is available under the stand-by state.
After the appliance run under the DIMMER, Power ON/OFF or Filter Monitor
could be available with respective button, but the DIMMER remain on.
5 ． 6 Room temperature display (optional)
When the appliance operates with the Room Temperature Display, the room
temperature can be displayed in any mode except Sleep and Dimmer mode. It
will display the setting temperature in 10 sec after receive any signal from
remote control, then display the room temperature. (Only is the Delay
time(Setting Timer) display with the Non-real time condition, include the
stand-by state)
Remark: The Room Temperature Display can be available after the EEPROM
23