25.
EN
5.5: Spark Plug Service
1. Remove the spark plug cap
2. Clean any dirt and debris from around the spark plug base
3. Use a wrench to remove the spark plug. Refer to Fig. 5.3
Fig. 5.3
4. Visually inspect the spark plug. Discard it if the insulator is
cracked or chipped. Clean the spark plug with a brush if it is to be
reused.
5. Measure the plug gap with a feeler gauge. The gap should be
0.7 to 0.8 mm (0.028 to 0.031 inch). Correct as necessary by care-
fully bending the side electrode. Refer to Fig. 5.4
Fig. 5.4
6. Install the correctly gapped spark plug back into the original posi-
tion.
Spark Plug
Spark Plug Cap
Spark Plug Wrench
Side Electrode
Содержание HHD1250
