Hyundai H-HI1-10-UI580, Инструкция по эксплуатации

Страница: 8 / 52

8.
Gas forced heater
EN
ATTENTION!
For ignition of the device never use matches or lighters or other
sources of the open flame
NOTE:
Heater can be supplied with the connected gas hose and gear, in this
case to produce the above steps are not necessary.
3. DISPOSAL
Detailed information on the recycling can be obtained from representative of the local authority.
Service life of the device specified in the warranty card.
4. ASSEMBLY AND INSTALLATION
1. Carefully remove the heater from the package.
2. Make sure that the heating elements and other parts of the appliance have no remaining
crumbles of packing foam plastic or other debris.
3. Connect the heater to a suitable electric socket ~220V, 50Hz. Make sure that the machine is
properly earthed.
4. Connect the gas supply hose to the pressure regulator and connect the regulator to a suitable
LPG cylinder.
5. Open the tap of the cylinder and check the supply hose and fittings for gas leak. For this
operation it is recommended to use an approved leak detector.
ATTENTION!
All gas joints and pipes should be absolutely tight to exclude even
slightest gas leaks. Never use matches, lighters, and other sources
of open flame for leak checks of joints. Use soapy water.
It is prohibited to use the gas-fired heater in flats of high-rise
buildings, bedrooms, bathrooms, and cellars.
Upon first ignition, it is recommended to preliminarily switch the
heater on outdoors, after which it can be used indoors.
The room, where the gas-fired heater is used, should be equipped
with natural ventilation.
Do not use the heater during sleep.
Always use only certified, recommended by the manufacturer,
and properly rated hoses/pressure reducers for connection of the
appliance.
Always use only the gas type indicated by the manufacturer.