EN - 68
SYSTEM SETUP
2.7.1 FILTER
You can select the digital filter at 2x, 1x or off.
3 VIDEO SETUP PAGE
3.1 VIDEO VÝSTUP
OFF:
Set video output to the CVBS.
YUV:
Set video output in analog component video format when the component video outputs
are used.
P_YUV:
Set video output as progressive YUV signals if the component video outputs are used.
RGB:
Set video output in Red/Green/Blue format if the SCART output is used.
P_RGB:
Set video output as progressive RGB signals if the SCART output is used.
NOTE:
If the video setting differs from the physical video connection, the TV set may have poor
picture. You are supposed to press [V-MODE] on the remote control repeatedly to switch to an
appropriate video output mode.
3.2 COLOR SETTING
3.2.1 ShARPNESS
There are three options (
hIGh
,
MEDIUM
and
LOW
) for you to choose in this item.
3.2.2 BRIGhTNESS, CONTRAST, hUE
and
SATURATION
Enter these items respectively, use direction key [←]/[→] to adjust the value, then press [EN
-
TER] to confirm it.
3.2.3 GAMMA
There are four options (
hIGh
,
MEDIUM
,
LOW
and
NONE
) for you to choose in this item.
3.2.4 LUMA DELAY
There are two options (
0T
and
1T
) for you to choose in this item.
3.3 FONT SIzE
Choose your preferred font size for the English subtitles in this setting item.
3.4 FONT COLOR
Choose your preferred font color for the English subtitles in this setting item.
3.5 FONT BACK COLOR
Choose your preferred background color, transparent or black, for the English subtitles in this
setting item.
NOTE:
Setting entries
FONT SIzE
,
FONT COLOR
and
FONT BACK COLOR
apply for
MPEG4
disc.
Содержание DV5S747
Страница 78: ...Pozn mky Pozn mky notatky notes...
Страница 79: ...Pozn mky Pozn mky notatky notes...
Страница 80: ...Seoul Korea...
