EN - 65
EN
SYSTEM SETUP
1.5 SCREEN SAVER
ON:
If the image remains motionless on the screen, for example the disc is paused, stopped
etc, for several minutes, a screen saver will appear on the screen. You can press any key or
button except [STANDBY] to wake it up.
OFF:
Disable the screen saver function.
1.6 LAST MEMORY
ON:
Each time you turn off the unit or stop the disc, it will memorize the last play time. Next time
you turn on the unit
and play the same disc, the unit will play from that memorized point.
OFF:
Disable the last memory function.
2 AUDIO SETUP PAGE
2.1 ANALOG AUDIO SETUP
2.1.1 DOWNMIX
LT/RT:
The 5.1-channel audio is mixed into left channel and right channel and is output via the
FL and FR speaker
respectively.
STEREO:
The 5.1-channel audio is mixed into stereo signal and is output via the FL and FR
speaker.
3D SURROUND:
This mode creates a virtual surround effect from stereo or multi-channel audio
contents.
5.1Ch:
Turn off the DOWNMIX mode. If the unit is connected to 5.1-channel amplifier, this item
should be selected.
NOTE:
This function only applies to the Dolby AC -3 encoded 5.1-channel discs.
2.1.2 FRONT, CENTER, REAR SPEAKER and SUBWOOFER
Only when the
DOWNMIX
mode is turned off (
DOWNMIX
is set to
5.1Ch
) are the
CENTER
SPEAKER
and
REAR SPEAKER
activated. The
FRONT SPEAKER
can be set to
LARGE
or
SMALL
. The
CENTER SPEAKER
,
REAR SPEAKER
can be set to
LARGE
,
SMALL
or
OFF
and the
SUBWOOFER
can be set to
ON
or
OFF
.
NOTE:
If the speaker is set to
LARGE
, the output level will be higher than that of
SMALL
.
If the speaker is set to
SMALL
, the output level will be lower than that of
LARGE
.
If a speaker is set to
OFF
, no audio is outputted from it.
2.1.3 DIALOG
When
DOWNMIX
is set to
LT/RT
or
STEREO
, this item is available.
Adjust the value of this item to control the dialog volume.
NOTE:
When playing 5.1CH disc, this item can be used to adjust the volume of the speakers.
2.1.4 D.R.C. (Dynamic Range Control)
You can set this item to AUTO, ON or OFF.
2.2. DIGITAL AUDIO SETUP
2.2.1 DIGITAL OUTPUT
SPDIF/OFF:
There will be no digital audio signal output. (Coaxial off)
SPDIF/RAW:
The digital audio signal output will be in its raw format.
SPDIF/PCM:
The digital audio signal output will be in PCM format.
Содержание DV5S747
Страница 78: ...Pozn mky Pozn mky notatky notes...
Страница 79: ...Pozn mky Pozn mky notatky notes...
Страница 80: ...Seoul Korea...
