CONTROLS AND EQUIPMENT
1- 55
B730A01FC-EAT
Operation Tips
o To keep dust or unpleasant fumes from enter-
ing the car through the ventilation system,
temporarily set the air intake control at "Recir-
culation". Be sure to return the control to
"Fresh" when the irritation has passed to
keep fresh air in the vehicle. This will help
keep the driver alert and comfortable.
o Air for the heating/cooling system is drawn in
through the grilles just ahead of the wind-
screen. Care should be taken that these are
not blocked by leaves, snow, ice or other
obstructions.
o To prevent interior fog on the windscreen, set
the air intake control to the fresh air ( )
position and fan speed to the desi-red posi-
tion.
NOTE:
When the A/C is operated continuously on
the floor-defrost level (
) or defrost level
(
), it may cause fog to form on the exterior
windscreen by the temperature differential.
At this time set the air flow control to the face
level position ( )and fan speed control to the
low position.
Use the heating/ventilation system to defrost or
defog the windscreen:
To remove the interior fog on the windscreen;
o Set the air flow control to the defrost (
)
position. (The A/C will be on automatically
and it will be changed to "Fresh" mode.)
o Set the temperature control at the desired
position.
o Set the fan speed control between "1" and "4"
position.
To remove the frost or exterior fog on the
windscreen;
o Set the air flow control to the defrost (
)
position. (The A/C will be on automatically
and it will be changed to "Fresh" mode.)
o Set the temperature control to the warm.
o Set the fan speed control to position "3" or "4".
B720A01FC-EAT
DEFROSTING/DEFOGGING
HGK002
