CONTROLS AND EQUIPMENT
1- 33
SB220D1-E
HIGH AND LOW BEAM
To turn on the headlight high beams, push the
lever forward (away from you). For low beams,
pull the lever back (toward you). The appropriate
headlight beam indicator light will come on at the
same time.
SB220E1-E
HEADLAMP FLASH
SB220C2-E
LIGHTING SWITCH
The vehicle sidelamps and headlamps are oper-
ated by rotating the end of the turn signal switch
barrel. To operate the parking lamps, rotating the
switch to the first detent with ignition switch at the
"OFF" position will cause the lamps to illuminate.
To operate the headlamps, the turn signal switch
barrel should be rotated to the second detent.
The headlamps will only operate when the igni-
tion switch is at the "On" position. If the ignition
switch is turned to the "Off" position, only the
parking lamps will function.
The headlamps may be flashed by pulling the
turn signal switch lever towards the steering
wheel. The headlamps will be extinguished when
the switch is released.
To indicate an intention to change lanes, moving
the lever slightly towards the direction of the
relevant turn signal will cause the turn signal
lamps to flash. When the lever is released, it will
return to the "off" position.
HGK039-D
To operate the auto light, turn the barrel on the
end of the multi-function switch. If you set the
multi-function switch to "AUTO", the tail lights
and headlights will be turned automatically on or
off according to external illumination.
B340F01L-GAT
Auto Light (Not all models)
HGK041-D
HGK233-D
