CONTROLS AND EQUIPMENT
1- 17
B180B01GK-GAT
Pre-tensioner Seat Belt (Not all models)
Your Hyundai vehicle is equipped with driver's
and front passenger's pre-tensioner seat belts.
The purpose of the pre-tensioner is to make sure
that the seat belts fit tightly against the occu-
pant's body in certain frontal collisions.
The pre-tensioner seat belts can be activated
alone or, where the frontal collision is severe
enough, together with the airbags.
The pre-tensioner seat belt operates in the same
way as an Emergency Locking Retractor (ELR)
type of seat belt. When the vehicle stops sudden-
ly, or if the occupant tries to lean forward too
quickly, the seat belt retractor will lock into posi-
tion. However, in certain frontal collisions, the
pre-tensioner will activate and pull the seat belt
into tighter contact against the occupant's body.
B180B01S-D
B230H03GK-GAT
Child Seat Restraint Suitability For Seat
Position
Use child safety seats that have been officially
approved and are appropriate for your children.
Age Group
Seating Position
1st
Passenger
Rear
Outboard
0 : Up to 10 kg
(0 ~ 9 months)
0+ : Up to 13 kg
(0 ~ 2 years)
I : 9kg to 18kg
(9 months ~
4 years)
II & III : 15kg to 36kg
(4 ~ 12 years)
X
X
L1
X
L1: Suitable for "Römer ISOFIX GR1" approved
for use in this mass group
(Approval No: E1 R44-03301133)
X : Seat position not suitable for children in this
mass group
NOTE:
This vehicle is equipped with thether anchor-
age and ISOFIX system to supply most suit-
able safety. we recommend to buy a child
restraint system to use thether anchorage
and ISOFIX system.
X
X
X
X
The seat belt pre-tensioner system consists
mainly of the following components.
Their locations are shown in the illustration.
1. SRS airbag warning light
2. Seat belt pre-tensioner assembly
3. SRS control module
WARNING:
To obtain maximum benefit from a pre-
tensioner seat belt:
1. The seat belt must be worn correctly.
2. The seat belt must be adjusted to the
correct position.
B180B01GK-D
Driver's side airbag
1
2
3
Passenger's
side airbag