manualshive.com logo in svg

Hyundai 2008 Accent, Руководство пользователя, Страница: 107 / 273

Поделиться
Скачать
Hyundai 2008 Accent Скачать руководство пользователя страница 107

1

FEATURES OF YOUR HYUNDAI

95

1

FEATURES OF YOUR HYUNDAI

95

!

HIGH-MOUNTED REAR
STOP LIGHT

B550A01S-GAT

In addition to the lower-mounted rear
stop lights on either side of the car, the
high mounted rear stop light in the center
of the rear window or inserted in the rear
spoiler also lights when the brakes are
applied.

B550A01MC

4 Door

B550A01MC-1

3 Door

WARNING:

Whenever leaving vehicle or parking
always set the parking brake as far as
possible and fully engage the vehicle's
transaxle into the park position.  Ve-
hicles not fully engaged in park with the
parking brake set are at risk for moving
inadvertently and injuring yourself or
others.

priate low gear on manual transaxle ve-
hicles or in the P (Park) position on auto-
matic transaxle vehicles.

CAUTION:

Driving with the parking brake applied
will cause excessive brake pad (or lin-
ing) and brake rotor wear.

Releasing the parking brake

To release the parking brake, first apply
the foot brake and pull the praking brake
lever slightly. Secondly, depress the re-
lease button and lower the parking brake
lever while holding the button.

!

Содержание 2008 Accent


















































































































































































































































































Отзывы:

Нет отзывов