background image

1

FEATURES OF YOUR HYUNDAI

94

PARKING BRAKE

DAY/NIGHT INSIDE REAR-
VIEW MIRROR

B520A01A-AAT

Your Hyundai is equipped with a day/
night inside rearview mirror. The "night"
position is selected by flipping the tab at
the bottom of the mirror toward you. In the
"night" position, the glare of headlights of
cars behind you is reduced.

OMC025047

B530A03A-AAT

Always engage the parking brake before
leaving the car. This also turns on the
parking brake indicator light when the
key is in the "ON" or "START" position.
Before driving away, be sure that the
parking brake is fully released and the
indicator light is off.

Applying the parking brake

To engage the parking brake, first apply
the foot brake and then without pressing
the release button in, pull the parking
brake lever up as far as possible. In
addition it is recommended that when
parking the vehicle on a gradient, the shift
lever should be positioned in the appro-

OMC035017

!

WARNING:

Do not adjust or fold the outside rearview
mirrors while the vehicle is moving. This
could result in loss of control, and an
accident causing death, serious injury
or property damage.

Содержание 2008 Accent


















































































































































































































































































Отзывы: