background image

1

FEATURES OF YOUR HYUNDAI

23

1

FEATURES OF YOUR HYUNDAI

23

!

B150B03A-AAT

Infant or Small Child

All 50 states have child restraint laws.
You should be aware of the specific re-
quirements in your state. Child and/or
infant safety seats must be properly placed
and installed in the 

rear seat

. Information

about the use of these restraints begins
on page 1-31.

WARNING:

Every person in your vehicle needs to be
properly restrained at all times, includ-
ing infants and children.  Never hold a
child in your arms or lap when riding in a
vehicle.  The violent forces created dur-
ing a crash will tear the child from your
arms and throw the child against the
interior.  Always use a child restraint
appropriate for your child's height and
weight, see page 1-31.

NOTE:

Small children are best protected from
injury in an accident when properly re-
strained in the rear seat by a child re-
straint system that meets the require-
ments of the Federal Motor Vehicle
Safety Standards. Before buying any
child restraint system, make sure that it
has a label certifying that it meets Motor
Vehicle Safety Standard 213. The re-
straint must be appropriate for your
child's height and weight. Check the la-
bel on the child restraint for this informa-
tion. See page 1-31.

B150C02A-AAT

Larger Children

Children who are too large for child re-
straint systems should always occupy the

rear seat

 and use the available lap/

shoulder belts. The lap portion should be
fastened snug on the hips and as low as
possible. Check belt fit periodically. A
child's squirming could put the belt out of
position. Children are afforded the most
safety in the event of an accident when
they are restrained by a proper restraint
system in the rear seat. If a larger child
(over age 13) must be seated in the front
seat, the child should be securely re-
strained by the available lap/shoulder
belt and the seat should be placed in the
rearmost position. Children under the age
of 13 should be restrained securely in the

rear seat

. NEVER place a child under

the age of 13 in the front seat. NEVER
place a rear facing child seat in the front
seat of a vehicle.

Содержание 2007 Accent




























































































































































































































































































Отзывы: