Hyundai 2007 Accent, Руководство пользователя

Страница: 137 / 283

1
FEATURES OF YOUR HYUNDAI
125
125
4. AUTO SEEK Select Button (Auto-
matic Channel Selection)
Press the AUTO SEEK select button.
When the
side is pressed, the unit will
automatically tune to the next higher fre-
quency and when the
side is pressed,
it will automatically tune to the next lower
frequency.
5. SCAN Button
When you press the button, frequency is
changed and the next channel is re-
ceived automatically. To stay on a sta-
tion, press the SCAN button again.
6. EQ Button
Press the EQ button to select the CLAS-
SIC, POPS, ROCK, JAZZ and OFF MODE
for the desired tone quality. Each press of
the button changes the display as fol-
lows;
7. PRESET STATION Select
Buttons
Six stations for AM, FM1 and FM2 respec-
tively can be preset in the electronic
memory circuit.
HOW TO PRESET STATIONS
Six AM and twelve FM stations may be
programmed into the memory of the ra-
dio. Then, by simply pressing the AM / FM
select buttons and/or one of the six sta-
tion select buttons, you may recall any of
these stations instantly. To program the
stations, follow these steps:
o Press AM/FM selector to set the band
for AM, FM1 and FM2.
o Select the desired station to be stored
by seek or manual tuning.
o Determine the preset station select
button you wish to use to access that
station.
!
CAUTION:
o Do not place beverages close to the
audio system. The audio system
mechanism may be damaged if you
spill them.
o Do not strike or allow anything to
impact the audio system, damage to
the system mechanisms could oc-
cur.
CLASSIC
→
POPS
→
ROCK
→
JAZZ
→
DEFEAT
o Press the station select button for more
than two seconds. A select button indi-
cator will show in the display indicat-
ing which select button you have de-
pressed. The frequency display will
flash after it has been stored into the
memory. You should then release the
button, and proceed to program the
next desired station. A total of 24 sta-
tions can be programmed by selecting
one AM and two FM station per button.
o When completed, any preset station
may be recalled by selecting AM, FM1
or FM2 band and the appropriate sta-
tion button.