Hyundai 2006 Sonata Скачать руководство пользователя страница 38 | Manualshive

Страница: 38 / 276

Hyundai 2006 Sonata Скачать руководство пользователя страница 38

1

FEATURES OF YOUR HYUNDAI

24

B180A01NF-AAT

SEAT BELT-Driver's 3-Point System with
Emergency Locking Retractor
To Fasten Your Belt

To fasten your seat belt, pull it out of the retractor
and insert the metal tab into the buckle. There
will be an audible "click" when the tab locks into
the buckle.
The seat belt automatically adjusts to the proper
length only after the lap belt portion is adjusted
manually so that it fits snugly around your hips.
If you lean forward in a slow, easy motion, the
belt will extend and let you move around. If there
is a sudden stop or impact, however, the belt will
lock into position. It will also lock if you try to lean
forward too quickly.

B180A01NF

NOTE:

If the driver's seat belt is not fastened when
the ignition key is turned from the "OFF"
position to the "ON" or "START" position,
the seat belt warning light will blink and the
warning chime will sound for approximately
six seconds to remind the driver to fasten
the driver's seat belt.

!

Release the button to lock the anchor into
position. Try sliding the height adjuster to make
sure that it has locked into position.

WARNING:

o Verify the shoulder belt anchor is locked

into position at the appropriate height.
Never position the shoulder belt across
your neck or face. Improperly posi-
tioned seat belts can cause serious inju-
ries in an accident.

o Failure to replace seat belts after an

accident could leave you with damaged
seat belts that will not provide protec-
tion in the event of another collision
leading to personal injury or death.
Replace your seat belts after being in an
accident as soon as possible.

«
...
36
37
38
39
40
...
»

Содержание 2006 Sonata





















































































































































































































































































Отзывы:

Нет отзывов