manualshive.com logo in svg

Hyundai 2006 Sonata, Руководство пользователя, Страница: 209 / 276

Поделиться
Скачать
Hyundai 2006 Sonata Скачать руководство пользователя страница 209

6

DO-IT-YOURSELF MAINTENANCE

5

G030C01JM-AAT

To Check the Oil Level

Before checking the oil, warm up the engine to
the normal operating temperature and be sure
your car is parked on level ground. Turn the
engine off.

Wait five minutes, then remove the dipstick,
wipe it off, fully reinsert the dipstick and withdraw
it again. Then note the highest level the oil has
reached on the dipstick. It should be between
the upper ("F") and lower ("L") range.

!

WARNING:

Be very careful not to touch the radiator
hose when checking the engine oil as it may
be hot enough to burn you.

G030C01NF

G030C02NF

(2.4L)

(3.3L)

NOTE:

o For good fuel economy, SAE 5W-20 (5W-

30), ILSAC GF-3 engine oil is preferred
regardless of regional option and en-
gine variation.

o If SAE 5W-20, ILSAC GF-3 engine oil is

not available, secondary recommended
engine oil for corresponding tempera-
ture range can be used.

Содержание 2006 Sonata





















































































































































































































































































Отзывы:

Нет отзывов