manualshive.com logo in svg

Hyundai 2006 Sonata, Руководство пользователя, Страница: 110 / 276

Поделиться
Скачать
Hyundai 2006 Sonata Скачать руководство пользователя страница 110

1

FEATURES OF YOUR HYUNDAI

96

B660D01NF-AAT

To Resume the Preset Speed

The vehicle will automatically resume the speed
set prior to cancellation when you push the
control switch "RESUME (ACCEL)" and re-
lease it to return (when travelling above 25
mph).

B660D01NF

B660F01NF-AAT

To Reset at a Slower Speed

1. Push the control switch "SET (COAST)" and

hold it. While the control switch is pushed, the
vehicle speed will gradually decrease.
If the "SET(COAST)" switch is selected, the
cruise "SET" indicator light in the instrument
cluster will illuminate.

2. When the desired speed is obtained, release

the control switch.

B660B02NF

B660E01NF-GAT

To Reset at a Faster Speed

1. Push the control switch "RESUME (ACCEL)"

and hold it.
If the control switch "RESUME(ACCEL)" is
selected, the cruise "SET" indicator in the
instrument cluster will illuminate.

2. Accelerate to desired speed and release the

control switch. While the control switch is
held, the vehicle will gradually gain speed.

o Shift the selector lever to "N" position (Auto-

matic transaxle).

o Decrease the vehicle speed lower than the

memory speed by 9 mph (15 km/h).

o Decrease the vehicle speed to less than  25

mph (40 km/h).

o Release the cruise control ON/OFF switch.

If the control switch "RESUME(ACCEL)" is
selected, the cruise "SET" indicator in the in-
strument cluster will illuminate.

Содержание 2006 Sonata





















































































































































































































































































Отзывы:

Нет отзывов