background image

1

FEATURES OF YOUR HYUNDAI

52

WARNING AND INDICATOR LIGHTS

B260B01JM-AAT

SRS (Airbag) Warning Light

The SRS warning light comes on for about  6
seconds after the key is turned to the "ON"
position or after the engine is started, after which
it will go out.

This light also comes on when the SRS is not
working properly. If the AIRBAG warning light
does not come on, or continuously remains on
after operating for about 6 seconds when you
turned the ignition key to the "ON" position or
started the engine, or if it comes on while driving,
have the SRS inspected by an authorized
Hyundai dealer.

B260D01A-AAT

Turn Signal Indicator Lights

The blinking green arrows on the instrument
panel show the direction indicated by the turn
signals. If the arrow comes on but does not blink,
blinks more rapidly than normal, or does not
illuminate at all, a malfunction in the turn signal
system is indicated. Your dealer should be
consulted for repairs.

B260E01NF-AAT

Seat Belt Reminder Light
and Chime (Driver's side)

The driver's seat belt reminder light blinks and
the warning chime sounds for 6 seconds when
the ignition key is turned from the "OFF" position
to the "ON" or "START" position to remind the
driver to fasten the driver's seat belt.

B260F01A-AAT

High Beam Indicator Light

The high beam indicator light comes on when-
ever the headlights are  switched to the high
beam  or flash position.

B260G01A-AAT

Low Oil Pressure Warning Light

CAUTION:

If the low oil pressure warning light stays on
while the engine is running, serious engine
damage may result. The oil pressure warning
light comes on whenever there is insufficient
oil pressure. In normal operation, it should
come on when the ignition switch is turned on,
then go out when the engine is started. If the
oil pressure warning light stays on while the
engine is running, there is a serious malfunc-
tion.
If this happens, stop the car as soon as it is safe
to do so, turn off the engine and check the oil
level. If the oil level is low, fill the engine oil to
the proper level and start the engine again. If
the light stays on with the engine running, turn
the engine off immediately. In any instance
where the oil light stays on when the engine
is running, the engine should be checked by
a Hyundai dealer before the car is driven again.

!

B260A01Y-GAT

Front Fog Light Indicator Light

This fog indicator light comes on when the
ignition key is turned to the "ON" position and the
front fog light switch is on.

Содержание 2005 Sonata
















































































































































































































































































Отзывы: