manualshive.com logo in svg

Hyundai 2005 Sonata, Руководство пользователя, Страница: 212 / 271

Поделиться
Скачать
Hyundai 2005 Sonata Скачать руководство пользователя страница 212

6

DO-IT-YOURSELF MAINTENANCE

14

G060C04NF

11. Installation is the reverse order of disas-

sembly.

NOTE:

Spark plugs should be tightened firmly.
(Tightening torque: 18.0 lb.ft (2.5 kgf.m))
Over-tightening can damage the threads in
the aluminum cylinder head. Also, leaving
them too loose can cause the spark plug to
get very hot and possibly result in damage
to the engine.

CAUTION:

o Operating your vehicle without using a

proper air cleaner filter in place can result
in excessive engine wear.

o When removing the air cleaner filter, be

careful that dust or dirt does not enter
the air intake. These may result in dam-
age to the air cleaner filter.

!

CHANGING THE AIR
CLEANER FILTER

G070A03Y-AAT

The replacement of the air cleaner filter is
performed in the following manner.

1. Unsnap the clips around the cover.
2. When this is done, the cover can be lifted off,

the old filter removed and the new filter put in
its place.

Genuine Hyundai replacement parts are rec-
ommended.

HNF5011

Содержание 2005 Sonata
















































































































































































































































































Отзывы:

Нет отзывов