manualshive.com logo in svg

Hyundai 2005 Santa Fe, Руководство пользователя

Владелец Руководство по эксплуатации для Hyundai 2005 Santa Fe доступно для загрузки бесплатно с нашего сайта. Получите ценную информацию о вашем автомобиле с помощью этого руководства. Загрузите его прямо сейчас с {сайта}. Не упустите возможность быть в курсе всех особенностей вашего автомобиля!

Поделиться
Скачать
background image

1

FEATURES OF YOUR HYUNDAI

31

!

B230G01O-AAT

Installation on Outboard Rear Seats

WARNING:

o If the retractor is not in the Automatic

Locking mode, the child restraint sys-
tem can move when your vehicle turns or
stops abruptly.

o Do not install any child restraint system

in the front passenger seat. Should an
accident occur and cause the passenger
side airbag to deploy, it could severely
injure or kill an infant or child seated in
an infant or child seat. Therefore, only
use a child restraint system in the rear
seat of your vehicle.

To install a child restraint system in the outboard
rear seats, extend the shoulder/lap belt entirely
from its retractor until a "click" is felt. This will
engage the seat belt retractor automatic locking
feature, which allows the seat belt to retract but
not extend. Install the child restraint system,
buckle the seat belt and allow the seat belt to
take up any slack. Make sure that the lap portion
of the belt is tight around the child restraint
system and the shoulder portion of the belt is
positioned so that it can not interfere with the
child's head or neck. Also, double check to be
sure that the retractor has  engaged the Auto-
matic Locking feature by trying to extend web-
bing out of the retractor. If the retractor is in the
Automatic Locking mode, the belt will be locked.

After installation of the child restraint system, try
to move it in all directions to be sure the child
restraint system is securely installed. If you need
to tighten the belt, pull more webbing toward the
retractor. When you unbuckle the seat belt and
allow it to retract, the retractor will automatically
revert back to its normal seated passenger
Emergency Locking usage condition.

NOTE:

o Before installing the child restraint sys-

tem in any seating position, read the
instructions supplied by the child re-
straint system manufacturer.

o If the seat belt does not operate as de-

scribed, have the system checked imme-
diately by your authorized Hyundai dealer.

B230G01L

B230F01JM-AAT

Installation on Rear Seat Center Position

To install a child restraint system in the center
rear seat, extend the shoulder/lap belt entirely
from its retractor until a "click" is felt. This will
engage the seat belt retractor automatic locking
feature, which allows the seat belt to retract but
not extend. Install the child restraint system,
buckle the seat belt and allow the seat belt to
take up any slack. Make sure that the lap portion
of the belt is tight around the child restraint
system and the shoulder portion of the belt is
positioned so that it can not interfere with the
child's head or neck. Also, double check to be
sure that the retractor has  engaged the Auto-
matic Locking feature by trying to extend web-
bing out of the retractor. If the retractor is in the
Automatic Locking mode, the belt will be locked.

B235G01O-A

Содержание 2005 Santa Fe






















































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 2005 Santa Fe

Vauxhall Ampera Owner'S Manual preview
Ampera
Бренд: Vauxhall Страницы: 199
BMW 3-series convertible Complete Vehicle Workbook preview
3-series convertible
Бренд: BMW Страницы: 98
Toyota RX450h 2010 Emergency Response Manual preview
RX450h 2010
Бренд: Toyota Страницы: 35
Quadratec 12226.3011 Installation Manual preview
12226.3011
Бренд: Quadratec Страницы: 8
Jaeger J05252127 Fitting Instructions Manual preview
J05252127
Бренд: Jaeger Страницы: 17
iDataLink ADS-TBSL-GM Install Manual preview
ADS-TBSL-GM
Бренд: iDataLink Страницы: 6
Roadmaster 195125 Assembly And Operating Instructions preview
195125
Бренд: Roadmaster Страницы: 4
Classic AutoAir Mustang 1969 Installation Manual preview
Mustang 1969
Бренд: Classic AutoAir Страницы: 44
Classic Accessories OVER DRIVE PolyPRO 3 Car Cover Instructions preview
OVER DRIVE PolyPRO 3 Car Cover
Бренд: Classic Accessories Страницы: 2
ROLEC WallPod Series Installation Instructions preview
WallPod Series
Бренд: ROLEC Страницы: 2
Metra Electronics 99-7804 Installation Instructions Manual preview
99-7804
Бренд: Metra Electronics Страницы: 10
Menabo 171071 Fitting Instructions preview
171071
Бренд: Menabo Страницы: 4
Air Lift AirCELL 52205 Installation Manual preview
AirCELL 52205
Бренд: Air Lift Страницы: 12
Subaru XV Crosstrek Owner'S Manual preview
XV Crosstrek
Бренд: Subaru Страницы: 90
BrandMotion AVMS-3604 Installation Instructions Manual preview
AVMS-3604
Бренд: BrandMotion Страницы: 9
Telwin ST 160 Instruction Manual preview
ST 160
Бренд: Telwin Страницы: 32
Perrycraft DynaSport Roof Rack Installation Instructions preview
DynaSport Roof Rack
Бренд: Perrycraft Страницы: 4
Toyota 2003 Prius Manual preview
2003 Prius
Бренд: Toyota Страницы: 307

Бренды по названию

Популярные бренды

Загрузить еще бренды