manualshive.com logo in svg

Hyundai 2005 Santa Fe, Руководство пользователя

Владелец Руководство по эксплуатации для Hyundai 2005 Santa Fe доступно для загрузки бесплатно с нашего сайта. Получите ценную информацию о вашем автомобиле с помощью этого руководства. Загрузите его прямо сейчас с {сайта}. Не упустите возможность быть в курсе всех особенностей вашего автомобиля!

Поделиться
Скачать
background image

2

DRIVING YOUR HYUNDAI

19

LIMITED-SLIP DIFFERENTIAL

D190A1HP-GAT

(If installed)

A limited-slip differential, if equipped, is for the
rear wheel differential only. The features of this
limited-slip differential are described below:
Just as with a conventional differential, the
wheel on one side is allowed to turn at a different
speed from the wheel on the other side when the
vehicle is cornering. The difference between
the limited-slip differential and a conventional
differential is that if the wheel on one side of the
vehicle loses traction, a greater amount of
torque is applied to the rear wheel on the other
side to improve traction.

CAUTION:

o

Never start the engine with the gearshift
lever placed in the forward or reverse
while one of the rear wheels is jacked up
and the other in contact with the
ground; doing so may cause the vehicle
to jump forward.

o

Use only recommended oil for LSD in
the rear axle.
See page 9-5 for the recommended oil
descriptions.

!

!

GOOD BRAKING PRACTICES

C130A01L-AAT

WARNING:

Nothing should be carried on top of the
cargo area cover behind the rear seat. If
there were an accident or a sudden stop,
such objects could move forward and cause
damage to the vehicle or injure the occu-
pants.

o After being parked, check to be sure the

parking brake is not engaged and that the
parking brake indicator light is out before
driving away.

o Driving through water may get the brakes

wet. They can also get wet when the car is
washed. Wet brakes can be dangerous!
Your car will not stop as quickly if the brakes
are wet. Wet brakes may cause the car to
pull to one side. To dry the brakes, apply the
brakes lightly while driving slowly until the
braking action returns to normal, taking care
to keep the car under control at all times. If
the braking action does not return to normal,
stop as soon as it is safe to do so and call your
Hyundai dealer for assistance.

o Don't coast down hills with the car out of gear.

This is extremely hazardous. Keep the car
in gear at all times, use the brakes to slow
down, then shift to a lower gear so that engine
braking will help you maintain a safe speed.

o Don't "ride" the brake pedal. Resting your

foot on the brake pedal while driving can be
dangerous because it can result in the brakes
overheating and losing their effectiveness. It
also increases the wear of the brake com-
ponents.

o If a tire goes flat while you are driving, apply

the brakes gently and keep the car pointed
straight ahead while you slow down. When
you are moving slowly enough for it to be safe
to do so, pull off the road and stop in a safe
place.

o Don't let your car creep forward. To avoid

creeping forward, keep your foot firmly on
the brake pedal when the car is stopped.

o Use caution when parking on a hill. Engage

the parking brake and place the gear selec-
tor lever in "P". If your car is facing downhill,
turn the front wheels into the curb to help
keep the car from rolling. If your car is facing
uphill, turn the front wheels away from the
curb to help keep the car from rolling. If there
is no curb or if it is required by other condi-
tions to keep the car from rolling, block the
wheels.

Содержание 2005 Santa Fe






















































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 2005 Santa Fe

Camoplast T4S User Manual preview
T4S
Бренд: Camoplast Страницы: 60
Jabra FREEWAY Datasheet preview
FREEWAY
Бренд: Jabra Страницы: 2
Jabra BT330 User Manual preview
BT330
Бренд: Jabra Страницы: 38
U.S. General 95904 Operating Instructions preview
95904
Бренд: U.S. General Страницы: 4
FALCON RIDGE HO-P500-FC04 Instructions For Installation And Care preview
HO-P500-FC04
Бренд: FALCON RIDGE Страницы: 8
Scosche 142HUD2 Manual preview
142HUD2
Бренд: Scosche Страницы: 8
Audiovox AA-BAT Programming Manual preview
AA-BAT
Бренд: Audiovox Страницы: 3
Victory 4x4 VRKCAP Install Instructions Manual preview
VRKCAP
Бренд: Victory 4x4 Страницы: 9
Jaeger 12020523 Fitting Instructions Manual preview
12020523
Бренд: Jaeger Страницы: 11
ULTIMATE SPEED 279619 Instructions For Use And Safety Manuallines preview
279619
Бренд: ULTIMATE SPEED Страницы: 40
Carcomm CHFS-34 HTC Installation Manual preview
CHFS-34 HTC
Бренд: Carcomm Страницы: 2
Saab 32 025 907 Installation Instructions Manual preview
32 025 907
Бренд: Saab Страницы: 37
Porsche BOXTER - Technical Manual preview
BOXTER -
Бренд: Porsche Страницы: 146
iQOS CCU01 Safety Warnings And Instructions preview
CCU01
Бренд: iQOS Страницы: 4
ECS Electronics CT-050-B1 Fitting Instructions Manual preview
CT-050-B1
Бренд: ECS Electronics Страницы: 42
Opel 2011 Astra J Owner'S Manual preview
2011 Astra J
Бренд: Opel Страницы: 242
Rajant 23-100068-001 Quick Start Manual preview
23-100068-001
Бренд: Rajant Страницы: 11
Edelbrock 71883 Installation Instructions preview
71883
Бренд: Edelbrock Страницы: 4

Бренды по названию

Популярные бренды

Загрузить еще бренды