Hyundai power products HYEA5200X, Инструкция по эксплуатации

Страница: 9 / 40

9
General Safety
• Make sure you thoroughly inspect the entire
work area and remove all objects and anything
that could be thrown by the machine or could
damage the engine or machine (branches,
stones, wire, toys, etc). Attempting to clear the
work area whilst using the machine will reduce
your concentration and creates a trip hazard.
Any liquid spilled on the floor may result in you
slipping.
• You must only work in daylight or with good
artificial light in good visibility conditions. Keep
people, children and animals away from the
working area.
• Never place the machine in a place with
unstable ground which could give way.
• You must pay special attention when
approaching obstacles that could compromise
visibility.
• Check the working environment for foreign
bodies and remove them.
• Do not use where there is a risk of fire or
explosion.
• Find and locate all fixed objects in the
ground, such as sprinkler systems, poles,
water valves, bases for washing lines etc
Make sure that you check for hidden
electrical cables or similar on the surface of
the ground. Make sure that the area to be
drilled is free of all underground obstacles
such as power cables, water and drainage
pipes.
• You must be careful near ravines, ditches or
embankments.
• Exercise extreme caution when operating on
or crossing gravel drives, walks, or roads. Stay
alert for hidden hazards or traffic.
•
Do not work in the rain and when there is a
thunderstorm or lightning risk. If there is bad
weather conditions, do not use the machine.
• Avoid working on ground that is stony, hard
or has many roots, strong recoil may occur at
the handles.
• Be careful on unstable ground. Always
ensure a safe standing position.
• During drilling, ejected rocks or pieces of
wood can injure people and animals.
• Do not use the machine in a wet
environment.
• Operate on a flat level ground. Never
operate on slopes.
• Always hold the unit with both hands when
operating. Keep a firm grip on the handlebars.
Be aware that the machine may unexpectedly
bounce upward or jump forward if the
machine should strike buried obstacles such
as large rocks or roots.
• Walk, never run with the machine.
• Use extreme caution when in reverse or
pulling the machine towards you.
• Do not operate the machine in confined
areas where there may be a risk of crushing
the operator between the machine and
another object.
• Be very careful when pulling the
machine toward you. You must look behind
you to make sure there are no obstacles
before and during operations in reverse gear
(if applicable).
•
Before leaving the machine to clear
blockages, check, clean, refuel or after
striking foreign object, you must stop the
engine.
Work Area
!
During Use
!