www.hyundaipowerproducts.co.uk
27
Assembly
STEP 4 : Locking Plate & Tipping Handle (Continued)
2. Place the spring into the cavity of the Tipping Handle (J). With the spring inside,
rest the Tipping Handle (J) on the shaft next to the Locking Plate (I), this will stop the
spring from falling out.
Use some force to push the Tipping Handle (J) downward, to line up the holes with
the shaft below. With M8 washers on either side of the Tipping Handle (J) place an
M8x55 bolt through all. Secure the bolt on the other side with an M8 nut.
❷
G
The bar pivots on the M8x55 bolt, it must be able to engage/disengage the
location pin on the locking plate.
!
J
I