www.hyundaipowerproducts.co.uk
24
Assembly
STEP 3 : Upper Drum Assembly
1. Place the Upper Drum (H) on top of the Lower Drum (F). There are arrows on
both halves of the drums to aid lining them up correctly. Using the indication
arrows, ensure the bolt holes line up.
Place all 6 M6x16 bolts in each of the holes around the whole circumference of
the drum. Secure each of these with an M6 washer and nut.
2. Secure the Mixing Blade (G) to the Upper Drum (H) by inserting the two M8x16
bolts from the outside. Next a Fibre washer should be screwed to the bolt,
followed by a Mixing Blade. *Some force may be required to position a Mixing
Blade over bolt hole. * The blades can then be secured with an M8 nut and
tightened. At this stage, ensure the Mixing Blades (G) are secured to the Lower
Drum (F) by tightening the bolts left loose in the previous step.
Images on next page
!
WARNING! THE FIBRE WASHER MUST BE BETWEEN THE MIXING BLADE AND UPPER
DRUM, OTHERWISE LEAKING WILL OCCUR.
This step requires fixing bag E.
!