3
1. INSTRUCTIONS
WARNING!
Read and understanding this
Manual. Always follow safety precautions in the Operator’s and Safety
Manual, Improper use can cause serious injury! Preserve this Manual carefully!
WARNING!
FUELS WITH MORE THAN 10% ETHANOL ARE NOT APPROVED FOR USE IN 2-STROKE ENGINES!
Use of alternative fuels, such as E-20(20% ethanol), E-85 (85% ethanol) or any fuels not meeting
requirements are not approved for use in 2-stroke gasoline engines!
USE OF ALTERNATIVE FUELS CAN CAUSE THE FOLLOWING PROBLEMS:
Poor engine performance, loss of power, overheating, fuel vapor lock, Improper clutch engagement,
premature deterioration of fuel lines, premature deterioration of gaskets, premature deterioration of
carburetors.
USING ALTERNATIVE FUELS AND/OR 2-STROKE OILS NOT IN CONFORMITY IN 2-STROKE ENGINES
WILL VOID YOUR ENGINE WARRANTY!
SAFETY PRECAUTIONS
Since the Concrete Cutter is a very high-speed tool, any misuse could be dangerous. In order to avoid
property damage or personal injury, it is EXTREMELY IMPORTANT that you read and follow these safety
precautions before you begin to use this appliance.
1. Worksite requirements:
a) The work site must be free of flammable or explosive materials or objects.
b) The surroundings of the work site must be tidy, unobstructed, with good visibility and well ventilated.
The operator on the ground must stand on non-slippery ground. Be very careful when working in wet
areas or during the rainy season (rain, snow, frost, ice).
c) Spectators should stay away from the saw during operation. Children, disabled people and animals
must always be kept away from the work site.
d) An object could be thrown at the operator by the cutting tool. It is therefore important to correctly position
the object to be cut to avoid inconvenience.
e) Organize the work to be undertaken, paying attention to the survey of the site in order to identify
hazards such as electric cables and flammable substances.
f)
Use warning signs to advise people not to enter the work area.
2. Cutting disc
a) Before installing a blade, make sure that the maximum operating speed of the blade exceeds or is equal
to the rotational speed of your circular saw.
b) Inspect the circular blade frequently and if the cutting blade is scratched or scraped, please replace it
immediately. Damaged blades could cause serious personal injury.
c) Never use the carbide blade, wood cutting blades or circular machine blades. Failure to do so could
cause serious injury or even death.
d) Use the appropriate blades for the different types of material to be cut.
e) Diamond blades have better cutting performance compared to abrasive blades. The blades have steel
in the center and the diamond particles are distributed on their cutting sides.
