This document applies to the LITHIUM SERIES® II Electric Torque Tools, model designations as follows;
Models: LST
Configurations: 0700, 1200, 2000, 3000, 5000
Option: U for USB Version if specified
Custom options: -zzzz if specified
Notice.
The information contained in this document is subject to change without notice. HYTORC makes no warranty of any kind
with regard to this material, including but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
HYTORC shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing,
performance, or use of this material. It is further recommended that the end-user or repair technician insure they have obtained and are
familiar with the latest revision of the manual for the equipment outlined in this document.
Restricted Rights Legend.
Use and duplication of the information contained within this manual is limited to the purchaser, end user,
or licensed HYTORC representative. It is recommended that proper training for the equipment outlined in this manual be conducted by
a HYTORC-authorized training representative for any person who is operating or repairing the equipment outlined in this document.
Modification of, or disclosure by any other agency or representative is strictly forbidden.
Product Modifications.
HYTORC DOES NOT ALLOW any of the products listed in this manual to be modified by any end user without
exception. Should an application require a modification to the tool, or any of the standard accessories please consult with your local
HYTORC representative and they will be able to obtain the assistance for any modification that may be required.
LITHIUM SERIES® II
is a registered trademark of HYTORC.
Copyright © 2019 HYTORC All Rights Reserved.
Reproduction, adaptation, or translation without prior written permission is
prohibited, except as allowed under the copyright laws.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
ORIGINAL INSTRUCTIONS
ABOUT THIS DOCUMENT
