LITHIUM SERIES® II
Electric Torque Tool Operations Manual
16
CHANGE TO RUNDOWN
Push the speed switch toward the rear of the tool to switch to the rundown position. At this speed the tool applies torque
at the minimum capability of the tool or approximately 5% the maximum capability of the tool.
Push Switch
forward
for slow speed
(Torque).
Push Switch
to the rear
for fast speed
Rundown -
to run down nuts.
With Speed Switch
in Rundown select
Loosen on the
direction switch -
to run off nuts.
The LITHIUM SERIES® II tool provides two speeds; torque and rundown. The rundown speed increases the speed to the
maximum output of the tool allowing the user to quickly run down the nut to prepare for a torqueing operation.
12 . CHANGE SPEED
