manualshive.com logo in svg

Hytorc LITHIUM II Series, Основное руководство по эксплуатации

Поделиться
Скачать
Hytorc LITHIUM II Series Скачать руководство пользователя страница 13

LITHIUM SERIES® II

 Electric Torque Tool Operations Manual

8

BATTERY RECYCLING

The RBRC (Rechargeable Battery Recycling Corporation) Seal on the Lithium-ion battery (or battery pack) indicates 
that the costs to recycle the battery (or battery pack) at the end of its useful life have already been paid by HYTORC 
The RBRC, in cooperation with HYTORC and other battery users, has established programs in the United States to 
facilitate the collection of spent Lithium-ion batteries. Help protect our environment and conserve natural resources 
by returning the spent Lithium-ion battery to an authorized HYTORC service center for recycling. You may also contact 
your local recycling center for information on where to drop off the spent battery. RBRC is a registered trademark of the 
Rechargeable Battery Recycling Corporation.

TEST THE BATTERY

The Lithium-Ion battery has a long run life and will power 
the tool at full speed until the battery is depleted, so there 
is no gradual drop in power during use.

 

•

For continuous use, have one or more spare battery 
packs charging while the tool is in use. When needed, 
simply swap batteries from the charger to the tool.

 

•

Batteries can be charged hundreds of times without 
any noticeable loss in capacity.

 

•

Push the TEST button on the side of the battery and 
the LED’s will provide an approximate indicator of 
remaining battery life 
 
1 LED ON  < 25% Battery Charge Left 
2 LEDs ON  < 50% Battery Charge Left 
3 LEDs ON  < 75% Battery Charge Left 
4 LEDs ON  < 100% Battery Charge Left

INSTALL THE BATTERY

The battery easily slides onto the tool body and snaps 
into place.

 

•

Press the release button on the battery and slide 
battery pack off the charger

 

•

Align the base of the tool with the rails in the 
battery and slide the battery pack firmly into the 
handle until you hear (or see) the lock snap in place

 

•

To remove the battery pack from the tool, press the 
release button on the battery and firmly pull the 
battery pack out of the tool 

NOTE:

 When not in use, remove the battery pack from 

the tool.

Battery Release

Button

(CONT ’ D.)

Содержание LITHIUM II Series





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды