5
Methods to receive DTMF signaling:
When a channel is programmed to receive DTMF
signaling, the preset functions on it will not work unless
a matching DTMF signaling is received.
During receiving, the LED solidly glows green; after
successful receiving, the LED keeps flashing orange
until the pre-defined time expires.
. Receiving an Emergency Alarm
You may customize the Emergency ID. The radio will
sound a fixed Emergency alert when it receives an
Emergency Alarm.
. Receiving an Individual Call
You may customize your Individual Call ID. The radio will
sound a special alert when it receives an Individual Call.
. Receiving a Group Call
You may customize your Group Call ID. The radio will
sound a special alert when it receives a Group Call.
4. Receiving Other Types of Codes
If the radio supports ID display, other types of codes
received will be displayed on the LCD.
5. Types of Response
Your radio may be set to give any of the following types
of response, when it receives an individual call or group
call:
) No Response
) Silent Alert: The LCD will display “Alert Call
Received” but no sound alert will be given.
) Sound Alert: The LCD will display “Alert Call
Received” with sound alert. And only the sound
alert will automatically reset.
Note: The numeric keypad must be set to the
DTMF keypad. (Refer to “Advanced
Operations → Keypad Mode” in page 32
for settings of the keypad mode.)
Advanced Operations
