Selecting a Zone
The radio supports up to zones. You can switch to
your desired zone through the programmable key or the
menu as follows:
. Key Press
Press the programmed Zone Up/ Zone Down key.
. Menu Operation
) Enter the main menu;
) Select “Zone” and press
to enter;
) Select your desired zone and press
to
confirm.
Selecting a Channel
The radio supports up to 56 channels. You’d better be
sure of the zone where your desired channel locates
before you switch the channel. The ways below are
available for channel switch.
. Press
or
.
. Enter the channel number directly when the keypad
mode supports to input channel numbers. (Refer to
“Advanced Operations → Keypad Mode” in page 32
for settings of the keypad mode. )
. Press the programmed Home Channel key to
switch to a specific channel. (Refer to “Advanced
Operations → Home Channel” in page 31 for
settings of the home channel. )
Transmitting
To transmit a call, press and hold down the PTT key,
and speak into the microphone at your normal voice
level. During transmission, the radio displays
with
red LED glowing solidly.
Note: The number of channels per zone should
be set via programming software by your
dealer.
Basic Operations
