This feature aims to prevent a radio user from occupying
a channel for an extended period. It also avoids potential
radio damage caused by overheating.
VOX
The VOX feature allows you to transmit voice without
pressing
and
holding
the
PTT
key.
The
radio
automatically transmits voice when the volume reaches
the preset level.
To turn this feature on or off, go to
Menu
>
Settings
>
Radio Set
>
VOX
>
On/Off
, and then select
On
or
Off
.
When this feature is enabled, the radio displays
.
After enabling this feature, you can set the sensitivity of
the external or internal microphone. Do as follows:
1 . Go to
Menu
>
Settings
>
Radio Set
>
VOX
>
Gain
Level
>
External
/
Internal
.
2 . Select the appropriate level.
A higher gain level indicates lower sensitivity, which
requires higher volume for triggering transmission.
Call Divert
The Call Divert feature allows you to divert an incoming
half-duplex private call to a designated radio.
To turn this feature on, do as follows:
1. Go to
Menu
>
Settings
>
Radio Set
>
Call Divert
>
On/Off
, and then select
On
.
2. Select
Divert ID
, and enter the ID.
3. Press the
OK/Menu
key.
To turn this feature off, select
Off
under
Call Divert
.
Call Priority
The Call Priority feature allows you to set the priority of
voice services except emergency call. When all channels
are occupied, the call requests are put in a queue
according to their priorities. During queuing, the radio
displays "Call Queued".
To set the priority, go to
Menu
>
Settings
>
Radio Set
>
Priority
, and then select one of the following as required:
Low
,
Medium
,
High
, and
Preemption
.
The
Preemption
option is available only when the
Preemptive Call feature is enabled by your dealer. A
preemptive call can interrupt other on- going calls with
lower priority to release the channels for itself.
DGNA
The DGNA feature allows you to join a dynamic group
added by the authorized dispatcher over the air interface
according to temporary task requirements. The dispatcher
can also delete the dynamic group from your radio.
The radio displays "DGNA Success!" when the dynamic
group is added successfully and "DGNA Deleted" when
the dynamic group is deleted. The added dynamic group
is saved on a dynamic subgroup list under
Subgroup
on
your radio.
GPS
The GPS feature allows you to view your location
information, query location information of another radio
user, and send your location information to the dispatch
station or another radio.
Turning the GPS Feature On or Off
In conventional mode, go to
Menu
>
Accessories
>
GPS
>
GPS On/Off
, and then select
On
or
Off
.
In trunking mode, only your dealer can turn on or off this
feature.
Viewing Location Information
You can view location information of your radio and
another radio.
Viewing Location Information of Your
Radio
Go to
Menu
>
Accessories
>
GPS
>
Position
.
Viewing Location Information of Another
Radio
l
Trunking Mode
To view location information of the nearest radio in a
designated group, go to
Menu
>
Accessories
>
GPS
>
Query Neighbors
>
Group Contact
, and then
select the required group contact.
l
Digital Channel in Conventional Mode
To view the location information of another radio, go
to
Menu
>
Accessories
>
GPS
>
Query Location
>
Contact List
, and select the required private contact.
Sending Location Information
In conventional mode, you can send your location
information to the required contact as follows:
1. Go to
Menu
>
Accessories
>
GPS
>
Position
, and
then press the
OK/Menu key
.
2. Select
Contact List
, and then select the target
contact.
21
