Hytera PD79 Ex Series, Руководство пользователя

Страница: 17 / 33

Mode Manner Operation
Call Log
screen, press or
(if
preprogrammed as
the ReDial or
BackDial key).
2. Select the required
phone contact from
the list.
3. Press or press
and hold the PTT
key.
Receiving a Phone Call
Conventional Mode
When receiving a phone call, you need to transmit the
preprogrammed connect code to access the telephone
system as described in Initiating a Phone Call.
After the radio accesses the telephone system
successfully, the call is established automatically.
Trunking Mode
When you receive a phone call, the radio displays .
To answer the call, press or press and hold the PTT
key within the preset period. After the call is established
successfully, the radio displays .
Ending a Phone Call
In conventional mode, a phone call ends in any of the
following cases:
l You transmit the preprogrammed disconnect code in
the same way as the connect code.
l The phone user hangs up.
In trunking mode, a phone call ends in any of the
following cases:
l
The calling or called party ends the call.
l
The call duration exceeds the period preset by your
dealer.
l A preemptive or emergency call interrupts the call.
l
The base station signal is lost.
All Call
Conventional Mode
An all call is a call from an individual user to all other
users on the current channel.
Trunking Mode
An all call is a call from an individual user to all other
users in a specific BS, area, or system.
According to whether the called party can respond, an all
call is classified into the following two types:
l
Broadcast All Call: The called party cannot respond
to the call.
l
General All Call: The called party can respond to the
call.
To set the type, go to
Menu
>
Settings
>
Radio Set
>
All
Call , and then select Broadcast Call or General Call .
Initiating an All Call
Your radio can initiate an all call only after being
authorized by your dealer.
The following table describes how to initiate an all call in
conventional mode and trunking mode.
Mode Manner Operation
Conventional
Preset
Contact
1. Rotate the Channel
Selector knob to select
the channel associated
with the all call contact.
2. Press and hold the PTT
key.
Contact List
1. Go to Menu > Contact
> Contact List .
2. Select the all call
contact.
3. Press and hold the PPT
key.
Trunking
Manual
Dial
1. Go to Menu > Settings >
Radio Set > Keypad
Mode , and then select
Enable .
2. From the home screen,
enter the all call number.
3. Press or or press
and hold the PTT key.
ReDial Call
Log
1. From the home screen,
press (if
preprogrammed as the
ReDial
key).
2. Select the all call log
from the list.
3. Press or press and
hold the PTT key.
Receiving an All Call
When you receive an all call, the radio displays , and
the call is established automatically.
13