4
1.
Install the bracket in a location where it
’
s easy to
operate the radio.
2.
Connect accessories such as the antenna and
power cord to the radio.
3.
Slide the radio into the properly mounted bracket
and secure it using the locking knobs.
4.
Install the remote speaker microphone hanger in a
location where it can be reached conveniently.
5.
Plug the remote speaker microphone into the
radio, but at first align the triangle index on the
remote speaker microphone with the microphone
installation index on the microphone connector.
Place the remote speaker microphone on the
hanger when you do not use it.
The parts of the radio are illustrated below:
No.
Part Name
No.
Part Name
1 Radio Unit
8 Power Interface
2 Locking Knobs
9 Power Cord (black)
3 Mounting Bracket
10 Power Cord (red)
4
4.8×20mm Self-
tapping Screws
11 Fuse
5
Remote Speaker
Microphone
12
RF Antenna
Connector
6
4×16mm Self-tapping
Screws
13
GPS Antenna
Connector
7
Remote Speaker
Microphone Hanger
/ /
Status Indication
The LCD display and LED indicators on the remote
speaker microphone indicate the operation status of
the radio.
LCD Icon
Icon Name
Icon
Radio Status
RSSI Icon
More bars indicate better
signal strength.
GPS Icon
The GPS feature is
enabled, and valid GPS
data is received.
The GPS feature is
enabled, but no valid GPS
data is received.
Icon Name
Icon
Radio Status
Scan Icon
The radio is scanning.
The radio stays on a non-
priority channel.
The radio stays on Priority
Channel 1.
The radio stays on Priority
Channel 2.
Roam Icon
The radio is roaming.
Volume
Icon
More bars indicate higher
volume.
Channel
Icon
CHXX
I n d i c a t e s t h e c u r r e n t
channel.
“
XX
”
denotes
the channel number, such
as
“
CH01
”
.
Zone Icon
ZONEXX
I n d i c a t e s t h e c u r r e n t
zone.
“
X X
”
denotes
the zone number, such as
“
ZONE01
”
.
TX Power
Icon
Low T X power for the
current channel.
High TX power for the
current channel.
LED Indicator
LED Indication
Radio Status
The LED indicator flashes
green.
Powering on
The LED indicator glows red.
Transmitting
The LED indicator glows green. Receiving
The LED indicator flashes
orange slowly.
Scanning or roaming
The LED indicator flashes
orange rapidly.
Emergency
The LED indicator glows
orange.
Call hung. During
a call, you can hold
down the PTT key
to talk to the other
party before the call
hang time expires.
