background image

35

Appendix

Input Method 

You can enter aliases, numbers or messages using the 
microphone with a keypad. The radio supports the following input 

methods: Chinese Pinyin (simplified), English and Number. 

Chinese Pinyin (Simplified) 

Operation: 

1. Press   to switch to Chinese Pinyin mode; 
2.  Enter the pinyin through alphanumeric keys; then a list of 

possible combinations and corresponding characters will 
appear; 

3.  Use the 

Up/Down 

key to choose the right pinyin; 

4.  Press the 

OK

 key to highlight the characters, and choose the 

right character using the 

Up/Down

 key; 

5.  Press the 

OK 

key to enter the selected character. 

You can repeat the above steps to continue. 

English 

Operation: 

1. Press   to switch to uppercase English or lowercase 

English mode; 

2.  Press the key which bears your desired letter repeatedly until 

the letter appears. 

You can repeat the above steps to continue. 

Number

Operation: 

1.  Press  

 to switch to Number mode;

2.  Enter the numbers through alphanumeric keys 

 to 

Special Character 

To enter common punctuations and special characters, press          
To input a space, press         . 

Note: 

You can use the 

Up/Down

 key to move the 

cursor leftward/rightward in the entered text. 

Содержание DIGITAL MOBILE RADIO









































Отзывы: