background image

28

Operation:

To enable or disable the feature, go to “Menu -> Accessories -> 
Horn & Lights”, and select “On” or “Off”; 
or 
Press the 

programmed

 Horn & Lights key.

Ignition Sense

The following options are available via the vehicle ignition. You 
may ask your dealer to assign any one to your radio. 

1.  Ignition or Switch

 

Description: 

The radio powers on or off by following either 

the ignition sense or the 

Power On/Off 

key. 

 

Operation:

 o power on the radio, start the engine or long 

press the 

Power On/Off

 key; . to power it off, stop the engine 

or press the 

Power On/Off 

key.

Ignition Only

 

Description: 

The radio powers on or off by following the 

ignition sense only. The 

Power On/Off

 key does not work. 

 

Operation: 

To power on the radio, start the engine; to power 

it off, stop the engine. 

2.  PTT Disable

 

Description: 

The 

PTT

 key is enabled or disabled by following 

the ignition sense. 

 

Operation: 

To enable the 

PTT

 key, start the engine; to disable 

the 

PTT

 key, stop the engine.

3.  Disable Ignition Off

 

Description: 

The radio powers on by following either the 

ignition sense or the 

Power On/Off

 key, but it powers off only 

through the 

Power On/Off

 key. 

 

Operation:

 To power on the radio, start the engine or long 

press the 

Power On/Off

 key; to power it off, press the 

Power 

On/Off 

key.

Scrambler 

   

/Encrypt 

The Scrambler/Encrypt feature can encrypt your audio signals to 
prevent eavesdropping. Thus privacy of your communication is 
guaranteed. 
This Encrypt feature can encrypt your audio signals and 
messages to prevent eavesdropping. Thus privacy of your 
communication is guaranteed. 

Operation: 

 

On an analog channel, go to “Main Menu -> Settings -> 
Radio Set -> Scrambler” and select “Enable” or “Disable; on a 
digital channel, go to “Main Menu -> Settings -> Radio Set -> 
Encrypt” and select “Enable” or “Disable.

 

Press the programmed 

Scrambler/Encrypt

 key to enable 

Scrambler or Encrypt on the current channel (a high-pitched 
tone sounds); press the key again to disable the feature (a 
low-pitched tone sounds). 

 

If the Scrambler/Encrypt feature is enabled for a channel via 
the programming software, switch to the channel to enable 
the feature, or exit the channel to disable the feature. 

Busy Channel Lockout

If enabled via the programming software, this feature can prevent 
your radio interfering with other transmitting terminals on the 
same channel. If you hold down the 

PTT

 key while the channel is 

Functions and Operations

Содержание DIGITAL MOBILE RADIO









































Отзывы: